Our “Pic of the Week” is from D&D Printing Company, Grand Rapids Michigan. Business Printing and Mail Service.
Hot-Stamped on Kluge 14×22, 130 lb Cougar Double-Thick Cover, Infinity Hologram Foils, 1/C Black Ink Stamped on Kluge 14×22. Magnesium Die from OWOSSO
Our “Pic of the Week” is from Jim Hellman — William Shakespeare, Sonnet 75 (side statements from Song of Solomon, Chapter 4, verses 4-7 and Decorum, J.A. Ruth and Company, New York)
For The Bodleian Library, the university library at Oxford for their exhibit on the 400th anniversary of William Shakespeare’s death.
Printed by Jim Hellman, The Ground Floor Garage Press
Illustration by Tim Ladwig
OwossoJournal2017 1st edition
Our new website & on-line ordering is more user friendly than ever
If you’ve never used our on-line ordering, or tried it once and didn’t care for
it, please give it another look. Placing your order on-line streamlines the entire process for us, and YOU. We get the information we need to make your die and you can keep track of your orders, re-order the same type of die using different artwork, print out your order form, order Make-Ready Supplies and more.
HANDMADE SOAP, POTTERY AND CANDLE STAMPS
MAKE AN IMPRESSION
Your handmade organic/natural soap, pottery and candles can make a lasting impression by debossing your brand name on your product with an Owosso Graphic Arts Acrylic or Magnesium Stamp. Owosso Graphic Arts Stamps are also a great way to customize your product with a client’s corporate logo, for baby and wedding showers, birthday parties, etc.
DESIGNING YOUR ARTWORK
Because Owosso Graphic Arts stamps are either milled on a CNC machine (Acrylic) or chemically etched (Magnesium) you can get creative with the design, but you will want to keep your design simple. Small intricate areas will not etch or mill very deeply to give you a nice clean impression on your product.
You’ll want to keep these things in mind when designing your artwork:
- Artwork color – We need 100% K (black) artwork. And we prefer all vector art, especially for the Acrylic stamps, where vector art is a MUST.
- Line Thickness – The weight or thickness of “lines” in your artwork, for a number of reasons, needs to stay on the heavy side. When etching your stamp, thin lines will etch down a tad smaller that in your art and won’t give you a noticeable impression. And the same applies to Acrylic (CNC machined) stamps.
- Text Size – Again, to have your design stamp nice and clean; keep your text (font style) simple. You can have a more “Stylish” font style, but the same rule applies as line thickness. Some font styles have thin lines, so you will want to stay on the larger side. Plus, small text won’t etch deep enough to give you good impression when stamped on your product.
- Size – Yes size does matter, when you are working with a bar of soap, small round candles or small pottery pieces for example. You will, of course, want your design to stand out when stamped on your product. A simple bold design will stand out and give a clean look.
USING YOUR OWOSSO GRAPHIC ARTS STAMP
- Position the stamp gently on your bar of soap, candle or clay and lightly tap the stamp.
- Carefully lift your stamp up and off your product. You will see a beautiful clean impression on your product.
- That’s it, you’re done!
Easy right? With proper care your stamp from Owosso Graphic Arts can be used over and over. To order please visit our website: https://www.owosso.com/industries/soap-stamping/
Our “Pic of the Week” is from Siri Beckman. This is one of my woodcuts. Originally I designed it for a lamp shade, but so many people wanted it as a print that I asked OWOSSO to make a “plate” suitable for letterpress printing. www.siribeckman.com
By Zida Borcich
Monica Wellington’s women’s clothing boutique, SPLENDIFEROUS, needed a new business card.
Splendiferous! had evolved over the years and needed a new card to reflect that. Keeping the dandelion puff, and “Splendiferous” spelled with an exclamation point in place of that “i,” in the middle, but it needed a new, chicer, interpretation that befit how the shop is now.
I printed her new designs half on white Cranes Lettra 600 gsm, and half on black super-thick, Museum Mount papers. We then gilded the lily and added gold, metallic edge gilding.
On the white paper, we used a pearlized white foil for the puff and on the black paper, we used gloss black foil for the puff. Everything else was in gold foil.
Dies made by Owosso Graphic Arts, of course!
How to Store and Recycle Your Dies
Storing Your Dies
It doesn’t matter what type of metal your die is made of — brass, copper or magnesium, they can easily be scratched or nicked. It’s recommended to store the dies in a foam envelope or bubble wrap and also to store them vertically versus stacking them on top of one another.
On the other hand, a good method for storing THERMAL KISS-CUTTING DIES is to drill a hole at one end to hang the die – picture a coat closet, but for dies! Hanging your dies avoids warping, but you can also stack the dies by taping a piece of cardboard over the face of the die. It’s best to avoid laying the stacked dies on a concrete floor, concrete has moisture, and moisture causes corrosion.
For embossing/debossing dies that have a counter die, it’s recommended to pin the counters to the die before storing them. If you just tape the counter to the die there is the possibility that shifting will occur and this will cause wear on both the die and counter. These marks will show up the next time you go to use the die if not stored properly.
Magnesium dies can corrode easily if the dies aren’t stored in a climate-controlled area. Spraying the dies with a cooking spray (i.e. PAM™) and keeping them in a zip-lock storage bag will help prevent corrosion. If your dies are Teflon® coated with OWOSSO Release Coat this will protect the dies from corrosion as well.
A common question we receive is: “Can I send my dies back to you to recycle?”
Honestly, the expense of shipping your dies back to us would cost more than the recycle value. Most likely you have a scrap dealer in your area that would be happy to recycle your dies. Don’t expect to get rich, but at least you know you’re doing the right thing! As of this writing we are receiving $.90/pound for brass, $1.36/pound for copper and $.26/pound for magnesium from our local scrap dealer.
Our “Pic of the Week” is from Richard Minsky:
Catalog of the exhibition
American Publishers’ Bindings on the Books of Amelia E. Barr 1882-1919
Collected and described by Richard Minsky
Cover adapted from the 1897 William Snelling Hadaway design for Prisoners of Conscienceby Amelia E. Barr. The center panel is archival pigment inkjet on canvas, then stamped in 23K gold on a Kensol 36T with a die made by OWOSSO. http://minsky.com/
Title: Elegant Wedding Cards
Like it or not, wedding season is nearly upon us! I created some new cards in 2016 and printed them on my 1882 Pearl letterpress in this year’s most fashionable color: blush pink.
My “Mr & Mrs” cards have always been popular, but I’ve been feeling like the design (previously set in vintage lead type) needed an upgrade, so I designed these stunners featuring a beautiful modern calligraphy typeface! Pick up a set here.
I also wanted to created a new design that would not only work for weddings (and not even same-sex unions at that), but any joyous occasion—birthdays, adoption, engagement, graduation… you name it, this card works. Available in blush here, but I’m thinking of printing them in lots of colors… Stay tuned!
Our “Pic of the Week” is a dual effort. Using magnesium letterpress plates from OWOSSO, the Time Vampire Brewing logo is by Derek Reitzel and the Bird Greeting Card is by Ashley Crowley. These were letterpressed at Signal-Return.
What Type of Metal to Choose for Foil Stamping, Embossing & Debossing Dies
Many people wonder what type of metal to choose for foil stamping, embossing & debossing dies. Several important factors combine to determine the choice between brass, magnesium and copper for creating the best results. No single factor should be used alone to make the decision. Since all of the factors listed below interact with one another, their cumulative effect should be considered. Experience will help you make the best material choice, and your printer, press operator, and photoengraver can all provide valuable assistance.
Choosing magnesium, when appropriate, can yield cost savings for your customer and speed up turn-around, without sacrificing quality. Magnesium is generally the preferred choice for foil stamping and debossing dies due to the etch depth that can be achieved.
Brass dies are hand sculpted and machined therefore making them the most expensive of the three metal choices. Brass dies are the most durable and since they can be repaired, the life of the die is almost endless. Interpretation of the artwork is only possible with brass dies, including shapes, textures and edges.
Copper is a relatively harder metal used for the same applications as magnesium dies. If your job requires a more durable metal, copper is the best selection.
Please consider the following:
- Surface Area Pressure
- Artwork Designs
- Length of Press Run
- Handling and Maintenance
- Experienced Craftsmanship
For more information click here: https://www.owosso.com/ordering-tech-tips/tech-tips/
Ribbons 4 All Venues uses magnesium dies from Owosso Graphic Arts to foil stamp award ribbons. Here are a few of the styles they make. http://www.ribbons4allvenues.com/index.htm